Further amendments in SRO 680(I)/2019 dated 28th June, 2019
SRO 573(I)/2020 is a Customs SRO dated 30 June 2020, listed by FBR as "Further amendments in SRO 680(I)/2019 dated 28th June, 2019".
FBR publishes this SRO as scanned images, so the text below was transcribed by Qanoon Digest from the page images, with tables set out as tables. Check the official PDF before relying on any wording or figure.
Page 1
GOVERNMENT OF PAKISTAN
MINISTRY OF FINANCE, ECONOMIC AFFAIRS, REVENUE AND STATISTICS
(REVENUE DIVISION)
Islamabad, the 30th June, 2020.
NOTIFICATION
(CUSTOMS)
S.R.O.573 (I)/2020.- In exercise of the powers conferred by sub-section (3) of section 18 of the Customs Act, 1969 (IV of 1969), the Federal Government is pleased to direct that the following further amendments shall be made in its Notification No. S.R.O. 680(I)/2019, dated the 28th June, 2019, namely: -
In the aforesaid Notification, -
(i) in the Table, in column (1), -
(a) after serial number 82 and entries relating thereto in columns (2), (3) and (4), the following new serial number and corresponding entries relating thereto in columns (2), (3) and (4) shall be inserted, namely: -
| "82A. | 1601.0000 | Sausages and similar products, of meat, meat offal or blood; food preparations based on these products. | 20"; |
(b) after serial number 120 and entries relating thereto in columns (2), (3) and (4), the following new serial numbers and corresponding entries relating thereto in columns (2), (3) and (4) shall be inserted, namely: -
| "120A | 2804.2100 | Argon | 10 |
| 120B | 2804.3000 | Nitrogen | 10"; |
(c) after serial number 130 and entries relating thereto in columns (2), (3) and (4), the following new serial numbers and corresponding entries relating thereto in columns (2), (3) and (4) shall be inserted, namely: -
| "130A | 2915.3930 | sec-Butyl acetate | 10 |
| 130B | 2915.3940 | Methyl acetate | 10 |
| 130C | 2915.3990 | Other | 10 |
| 130D | 3206.2010 | Chrome yellow | 15"; |
Page 2
(d) after serial number 156 and entries relating thereto in columns (2), (3) and (4), the following new serial number and corresponding entries relating thereto in columns (2), (3) and (4) shall be inserted, namely: -
| "156A. | 3903.9010 | Styrene acrylic emulsion | 10"; |
(e) after serial number 169 and entries relating thereto in columns (2), (3) and (4), the following new serial numbers and corresponding entries relating thereto in columns (2), (3) and (4) shall be inserted, namely: -
| "169A | 4016.9210 | Tip Eraser | 10 |
| 169B | 4016.9290 | Other | 10"; |
(f) after serial number 172 and entries relating thereto in columns (2), (3) and (4), the following new serial numbers and corresponding entries relating thereto in columns (2), (3) and (4) shall be inserted, namely: -
| "172A | 4411.1200 | Of a thickness not exceeding 5 mm | 5 |
| 172B | 4411.1300 | Of a thickness exceeding 5 mm but not exceeding 9 mm | 5 |
| 172C | 4411.1400 | Of a thickness exceeding 9 mm | 5"; |
(g) for serial number 185 and entries relating thereto in columns (2), (3) and (4), the following new serial numbers and corresponding entries relating thereto in columns (2), (3) and (4) shall be substituted, namely: -
| "185 | 5402.3300 | Of polyesters | 2.5 |
| 185A | 5402.4600 | Other, of polyesters, partially oriented | 2.5 |
| 185B | 5402.4700 | Other, of polyesters | 2.5 |
| 185C | 5402.5200 | Of polyesters | 2.5 |
| 185D | 5402.6200 | Of polyesters | 2.5"; |
(h) against serial numbers 186 and 187, in column (4), for the figure "8", the figure "4", shall be substituted;
(i) against serial numbers 191,192,193,194 and 195, in column (4), for the figure "5", the figure "2.5", shall be substituted;
Page 3
(j) against serial number 230, in column (4), for the figure "10", the figure "5", shall be substituted;
(k) serial number 253 and the entries relating thereto in columns (2), (3) and (4) shall be omitted;
(l) against serial number 259, 262, 264 and 267, in column (4), for the figure "40", the figure "20", shall be substituted;
(m) against serial number 266, in column (4), for the figure "20, the figure "10", shall be substituted;
(n) against serial number 286, in column (4), for the figure "12.5", the figure "6", shall be substituted;
(o) for serial number 302 and entries relating thereto in columns (2), (3) and (4), the following new serial numbers and corresponding entries relating thereto in columns (2), (3) and (4) shall be substituted, namely: -
| "302 | 72.25 | Flat rolled products of other alloy steel, of a width of 600 mm or more (excluding 7225.5000, 7225.9100, 7225.9200 and 7225.9900) | 11 |
| 302A | 7225.5000 | Other, not further worked than cold- rolled (cold- reduced) | 17.5 |
| 302B | 7225.9100 | Electrolytic ally plated or coated with zinc | 17.5 |
| 302C | 7225.9200 | Otherwise plated or coated with zinc | 17.5 |
| 302D | 7225.9900 | Other | 17.5"; |
(p) for serial number 303 and entries relating thereto in columns (2), (3) and (4), the following new serial numbers and corresponding entries relating thereto in columns (2), (3) and (4) shall be substituted, namely: -
| "303 | 72.26 | Flat-rolled products of other alloy steel, of a width of less than 600 mm (excluding 7226.9200 and 7226.9900) | 11 |
| 303A | 7226.9200 | Not further worked than cold-rolled (cold-reduced) | 17.5 |
| 303B | 7226.9900 | Other | 17.5"; |
(q) after serial number 330 and entries relating thereto in columns (2), (3) and (4), the following new serial number and corresponding entries relating thereto in columns (2), (3) and (4) shall be inserted, namely: -
Page 4
| "330A | 7326.1911 | Upto 10 Kg | 20"; |
(r) against serial number 334, in column (4), for the figure "5", the figure "10", shall be substituted;
(s) for serial number 337 and corresponding entries relating thereto in columns (2), (3) and (4), the following shall respectively be substituted, namely: -
| 337 | 76.16 | Other articles of aluminium (excluding 7616.9920) | 5"; |
(t) serial numbers 343,344 and 345 and the entries relating thereto in columns (2), (3) and (4) shall be omitted;
(u) for serial number 348 and entries relating thereto in columns (2), (3) and (4), the following new serial numbers and corresponding entries relating thereto in columns (2), (3) and (4) shall be substituted, namely: -
| "348 | 8311.1000 | Coated electrodes of base metal, for electric arc- welding | 10 |
| 348A | 8311.2000 | Cored wired of base metal, for electric arc-welding | 15 |
| 348B | 8311.3000 | Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame | 15 |
| 348C | 8311.9000 | Other | 30"; |
(v) for serial number 349 and entries relating thereto in columns (2), (3) and (4), the following new serial numbers and corresponding entries relating thereto in columns (2), (3) and (4) shall be substituted, namely: -
| "349 | 8402.1190 | Other | 5 |
| 349A | 8402.1990 | Other | 5"; |
(w) for serial numbers 430 and 431 and corresponding entries relating thereto in columns (2), (3) and (4), the following shall respectively be substituted, namely:-
| "430 | 8517.1219 | Other having C&F Value up to US$ 30 per set excluding Smart Phones | Rs.165/set |
| 431 | 8517.1219 | Other (having C&F Value above US$ 30 per set but not exceeding US$ | Rs.1,620/set"; |
Page 5
| 100 per set, including Smart Phones having C&F value up to US$ 30 per set) |
(x) against serial number 442 and 444, in column (4), for the figure "20", the figure "10", shall be substituted;
(y) serial numbers 443 and the entries relating thereto in columns (2), (3) and (4) shall be omitted;
(z) against serial number 445 and 446, in column (4), for the figure "15", the figure "10", shall be substituted; and
(aa) after serial number 529 and entries relating thereto in columns (2), (3) and (4), the following new serial number and corresponding entries relating thereto in columns (2), (3) and (4) shall be inserted, namely: -
| "529A | 9017.2000 | Other drawing, marking- out or mathematical calculating instruments | 5"; |
(ii) in paragraph 2, in clause (c), the figure "101" shall be omitted; and
(iii) for paragraph 5, the following shall be substituted, namely: -
"5. This Notification shall take effect from the 1st July, 2020 and if not rescinded earlier, shall remain in force till the 30th June, 2021.".
[C. NO. 6(1)/2019-CB-PT]
(S.M.Tariq Huda)
Additional Secretary
Which SROs does the title refer to?
- SRO 680(I)/201929 June 2019Superseded S.R.O 1265(I)/2018 dated 16.10.2018
Related Customs SROs on amendments to earlier sros
- SRO 576(I)/202030 June 2020Further amendment shall be made in SRO 558(I)/2004, dated 1st July, 2004
- SRO 575(I)/202030 June 2020Further amendment shall be made in SRO 1261(I)/2007, dated 31st December, 2007
- SRO 574(I)/202030 June 2020Further amendment shall be made in SRO 1640(I)/2019, dated 31st December, 2019
- SRO 578(I)/202029 June 2020Amendments in Notification no S.R.O 1090(I)/2010 dated 01.12.2010
- SRO 580(I)/202029 June 2020Amendments in Notification no S.R.O 43/2014 dated 20.01.2014
- SRO 579(I)/202029 June 2020Amendments in Notification no S.R.O 42/2014 dated 20.01.2014